The Audio-Technica AT-VM95SH/H cartridge and headshell combo is a top - notch audio solution. It features a dual moving magnet (MM) cartridge with a Shibata stylus, pre - mounted on an AT - HS6BK headshell. This combo offers very low distortion and excellent channel separation, delivering outstanding tonal quality. The durable low - resonance polymer housing with an aluminum cantilever is built to last. The cartridge body has threaded inserts, allowing easy mounting to the headshell with just two screws, no nuts needed. It's compatible with half - inch mount turntables, and the AT - VM95 cartridge body can be paired with any VM95 series stylus. Technical specs include a 3.5mV output voltage, a 20 - 25,000 Hz frequency response, and more. The package comes with the pre - mounted cartridge, installation screws, and washers.
Using your Audio - Technica AT - VM95SH/H cartridge and headshell combo is easy. First, make sure your turntable is a half - inch mount type, as this combo is designed for it. If you need to replace the stylus, since all VM95 series share the same body, you can use any of the six interchangeable AT - VMN95 replacement styli. When mounting the cartridge to the headshell, use the provided screws to attach it through the threaded inserts. No nuts are required, which makes the installation straightforward. For best results, set the tracking force between 1.8 and 2.2 grams. When it comes to maintenance, keep the stylus clean. You can use a stylus brush to gently remove dust and debris. Avoid touching the stylus with your fingers, as the oils can damage it. Store your combo in a dry and safe place when not in use to prevent any physical damage.
