The Audio-Technica AT-XP3 is a dual moving magnet (MM) cartridge crafted specifically for DJs. It features a high output level and strong tracking force, making it ideal for active DJing. Its durable polymer/glass fiber body with a conical bonded stylus ensures reliable performance and great sound reproduction. The carbon fiber-reinforced cantilever and nylon wire suspension enable precise tracking. The cartridge's design offers maximum visibility of the stylus tip, which is excellent for cueing up tracks. It's compatible with standard half-inch mount turntables. Also, the AT-XP3 cartridge body can work with any XP or VM95 series stylus, providing a wide range of options for different budgets and applications. With a 5.5mV output voltage, a frequency response of 20 - 18,000 Hz, and a tracking force of 0.2 - 0.4g, it's a top choice for reliable DJing. It comes with (2)x 11 mm installation screws, (2)x 8 mm installation screws, (2)x washers, (2)x nuts, and a nonmagnetic screwdriver.
Using the Audio-Technica AT-XP3 is easy. First, make sure your turntable is a standard half - inch mount one. Use the provided 11 mm or 8 mm installation screws, washers, and nuts to install the cartridge on your turntable with the non - magnetic screwdriver. When you're ready to DJ, take advantage of the high output level and strong tracking force for smooth play. The great visibility of the stylus tip makes it a breeze to cue up your next track. For maintenance, keep the cartridge clean. You can use a soft brush to gently clean the stylus. Avoid touching the stylus with your fingers as it can damage it. If you need to replace the stylus, the ATN - XP3 is the recommended replacement. Store the cartridge in a dry and safe place when not in use to prevent any physical damage.
