The Audio-Technica AT-VM95ML is a dual moving magnet (MM) phono cartridge with a microlinear stylus. It offers very low distortion and excellent channel separation, delivering outstanding tonal quality. The durable low-resonance polymer housing with an aluminum cantilever ensures long - lasting performance. It's easy to install as the cartridge body has threaded inserts, allowing it to be mounted to the headshell with just two screws, no nuts needed. Compatible with half - inch mount turntables, the AT - VM95 cartridge body can be used interchangeably with any VM95 series stylus. Technical specs include a 3.5mV output voltage, 20 - 25,000 Hz frequency response, and more. It comes with (2)x 11 mm installation screws, (2)x 8 mm installation screws, (2)x washers, and a nonmagnetic screwdriver.
Using your Audio - Technica AT - VM95ML phono cartridge is a breeze. First, make sure your turntable is a half - inch mount type as this cartridge is compatible with it. To install, use the provided screws and washers. The threaded inserts in the cartridge body let you simply screw it onto the headshell, no need for nuts. When using, set the tracking force between 1.8 - 2.2 grams as recommended. As for maintenance, keep the stylus clean. You can use a stylus brush to gently remove dust after each use. Avoid touching the stylus with your fingers as the oils can damage it. Also, store the turntable in a clean and dry place to prevent any moisture or dust from affecting the cartridge's performance. If you need to replace the stylus, you can choose any of the six interchangeable AT - VMN95 replacement styli since all VM95 Series share the same body.
