The Ecler WARM4 is a top - notch professional four - channel analogue rotary DJ mixer crafted in Barcelona, Spain. It comes with 4 phono and 4 line inputs, along with 2 mic inputs (one on the rear and one on the top). Each channel features a 3 - band full - cut EQ with large, easy - to - use rotary knobs and a 4th - order 3 - band full - cut master isolator. An outstanding feature is the analogue subharmonic synthesizer. It can generate and boost ultra - low frequencies for each channel and can be adjusted according to the song and the sound system. There's also an FX Send control for each channel with a pre/post fader selector. The balanced XLR and unbalanced RCA master outputs, along with an easily accessible RCA rec out on the top panel, make it very user - friendly. It uses high - quality Alps metal shaft potentiometers and has wooden side panels. Key features include independent gain/trim for each of the 4 channels, multiple input and output options, 3 - band EQ per channel, a master isolator, 18VDC/5mA max phantom voltage, and VU - meters. It operates on 90 - 264VAC 47 - 63Hz. The mixer comes with North American and standard European power cables and wooden side panels.
Using the Ecler WARM4 mixer is quite straightforward. First, connect your audio sources to the appropriate inputs. You can connect turntables to the phono inputs, other devices to the line inputs, and microphones to the mic inputs. Adjust the gain and trim on each channel to get the right volume level. Use the 3 - band EQ on each channel to fine - tune the bass, mid, and treble. If you want to add some extra low - end effect, use the analogue subharmonic synthesizer and adjust it according to the song you're playing and your sound system. For effects, use the FX Send control on each channel. When it comes to outputs, connect your speakers to the master outputs (either XLR or RCA) and use the headphone outputs for monitoring. As for the phantom voltage, it's set to ON by default for the mic inputs. Be careful when handling the mixer, as it has delicate components. Keep it in a dry and clean place to prevent damage. Regularly check the power cables for any signs of wear and tear. If you're not using it for a long time, unplug it from the power source. Clean the knobs and panels gently with a soft, dry cloth to maintain its appearance and functionality.
