The Audio-Technica VM540ML Cartridge, pre-mounted on the AT-HS10BK Headshell, is a top - notch audiophile choice. It's a dual - magnet cartridge with a microline nude stylus. This model is a lab bestseller and the top of Audio - Technica's 500 series. It offers outstanding channel separation and an extended frequency response, delivering super - accurate sound reproduction. The multilevel stylus shape not only reduces wear on your records but also wears well itself. As the cartridge breaks in, the sound quality gets even better. A center shield plate between the left and right channels cuts down on crosstalk. Note, it's not for DJ use. The VM540ML harks back to A - T's early high - end phono cartridge days while using today's advanced tech. With a frequency response of 20 - 27,000Hz, a 2.2 x 0.12 mil MicroLine nude square shank stylus, an aluminum tapered pipe cantilever, and more. It comes with an AT - HS10BK Headshell, installation screws, washers, hexagon nuts, a non - magnetic screwdriver, and a lead wire set.
Using the Audio - Technica VM540ML Cartridge is quite straightforward. First, take out the cartridge from the package. It comes pre - mounted on the AT - HS10BK Headshell, so you can directly start the installation process. Use the provided 4 installation screws, 2 washers, and 2 hexagon nuts to attach it to your turntable. The non - magnetic screwdriver will help you with the installation. Make sure to set the tracking force between 1.8 - 2.2g, with 2.0g as the standard setting. When playing records, just gently place the stylus on the record's groove. Remember, this cartridge is not for DJ use, so avoid using it in high - impact DJ setups. For maintenance, keep the stylus clean. You can use a stylus brush to remove any dust or debris. Store the cartridge in a safe place when not in use to prevent damage. As the cartridge breaks in, you'll notice an improvement in sound quality, so be patient and enjoy the evolving audio experience.
