The Audio-Technica AT-VM95EN/H combo is a top - notch audio solution. It features a dual moving magnet (MM) cartridge with a nude elliptical stylus. This cartridge comes pre - mounted on the AT - HS6BK headshell. It offers very low distortion and excellent channel separation, delivering outstanding tonal quality. The durable, low - resonance polymer housing with an aluminum cantilever is a great design. The cartridge body has threaded inserts, allowing easy mounting to the headshell with just two screws, no nuts needed. It's compatible with half - inch mount turntables. Also, the AT - VM95 cartridge body can be paired with any VM95 series stylus. The combo kit includes the pre - mounted AT - VM95EN cartridge, (2)x 11 mm installation screws, (2)x 8 mm installation screws, and (2)x washers. Technical specs include a moving magnet type, 3.5mV output voltage, 20 - 23,000 Hz frequency response, 47,000 ohms load impedance, 22 dB channel separation at 1 kHz, a nude elliptical stylus, an aluminum pipe cantilever, 1.8 - 2.2 g tracking force, and a weight of 6.1 g / 0.22 oz.
Using your Audio - Technica AT - VM95EN/H combo is easy. First, make sure your turntable is a half - inch mount type. If it is, you can directly use the pre - mounted cartridge on the AT - HS6BK headshell. You'll find the installation screws and washers in the package. Just use the screws to attach the cartridge to the turntable if needed. When playing records, set the tracking force between 1.8 and 2.2 grams for the best sound. For maintenance, keep the stylus clean. You can use a stylus brush to gently remove dust after each use. Avoid touching the stylus with your fingers as the oils can damage it. Store the cartridge in a dry and safe place when not in use. If you want to change the stylus, since all VM95 series share the same body, you can easily replace it with any of the six interchangeable AT - VMN95 replacement styli.
