The Audio-Technica AT-VM95EN is a dual moving magnet (MM) phono cartridge with a nude elliptical stylus. It offers very low distortion and excellent channel separation for outstanding tonal quality. The durable, low-resonance polymer housing with an aluminum cantilever ensures long - lasting performance. The cartridge body has threaded inserts, allowing easy mounting to the headshell with just two screws, no nuts needed. It's compatible with half - inch mount turntables, and the AT - VM95 cartridge body can be used interchangeably with any VM95 series stylus. Technical specs include an output voltage of 3.5mV, a frequency response of 20 - 23,000 Hz, and more. It comes with (2)x 11 mm installation screws, (2)x 8 mm installation screws, (2)x washers, and a non - magnetic screwdriver.
Using your Audio - Technica AT - VM95EN phono cartridge is a breeze. First, make sure your turntable is a half - inch mount type. Then, use the provided 11mm or 8mm installation screws and washers to attach the cartridge to the headshell. You don't need nuts, just tighten the two screws. When it comes to setting the tracking force, aim for between 1.8 - 2.2 grams. For the best sound, set the load impedance to 47,000 ohms. As for maintenance, keep the stylus clean. You can use a stylus brush to gently remove dust after each use. Also, store the cartridge in a safe place when not in use to prevent any damage to the delicate stylus. And if you ever need to change the stylus, any of the six interchangeable AT - VMN95 replacement styli will work with this cartridge body.
