The Audio-Technica AT-VM95SH is a top-notch dual moving magnet (MM) phono cartridge equipped with a high - performance Shibata stylus. It offers incredibly low distortion and excellent channel separation, delivering outstanding tonal quality. Its durable low - resonance polymer housing with an aluminum cantilever ensures long - lasting performance. Installation is a breeze as the cartridge body has threaded inserts, allowing it to be mounted to the headshell with just two screws, no nuts needed. This cartridge is compatible with half - inch mount turntables, and the AT - VM95 cartridge body can be paired with any VM95 series stylus. Technical specs include a 3.5mV output voltage, a frequency response of 20 - 25,000 Hz, and a load impedance of 47,000 ohms. It comes with (2)x 11 mm installation screws, (2)x 8 mm installation screws, (2)x washers, and a nonmagnetic screwdriver.
Using your Audio - Technica AT - VM95SH phono cartridge is easy. First, make sure your turntable is a half - inch mount type. Then, use the provided screws and washers to attach the cartridge to the headshell. You only need two screws as the cartridge has threaded inserts. When you're ready to play your records, set the tracking force between 1.8 - 2.2 grams. As for maintenance, keep the stylus clean. You can use a stylus brush to gently remove any dust after each use. Also, store your cartridge in a safe place when not in use to prevent damage. If you ever need to replace the stylus, you can choose from any of the six interchangeable AT - VMN95 replacement styli since all VM95 Series share the same body.
