The Audio-Technica AT-VM95C/H Combo is an affordable entry into the VM series of cartridges. It features a moving magnet (MM) cartridge with a conical stylus, offering excellent channel separation and low distortion for great tonal quality. The AT-VM95 cartridge body is interchangeable with any VM95 series stylus, giving you flexibility. It comes pre - mounted on the AT - HS6BK headshell, and the cartridge body has threaded inserts, allowing easy mounting to the headshell with just two screws, no nuts needed. This combo is compatible with most turntables. Technical specs include a 4.0mV output voltage, a 20 - 20,000 Hz frequency response, and more. The package includes the pre - mounted cartridge, 2 sets of 11 mm and 8 mm installation screws, and 2 washers.
Using your Audio - Technica AT - VM95C/H Combo is easy. First, make sure your turntable is turned off. The cartridge comes pre - mounted on the headshell, so you just need to attach it to your turntable using the provided 11 mm or 8 mm installation screws and washers. Once it's securely attached, you're ready to start playing your records. When using the turntable, set the tracking force between 1.8 - 2.2 grams for the best performance. For maintenance, keep the stylus clean. You can use a stylus brush to gently remove dust and debris after each use. Avoid touching the stylus with your fingers as the oils can damage it. Also, store your turntable in a clean and dry place to prevent any long - term damage to the cartridge. If you want to change the stylus, since all VM95 Series share the same body, you can easily replace it with any of the six interchangeable AT - VMN95 replacement styli.
