The Audio-Technica AT-PEQ30 is a standalone phono stage. It can be used with an existing turntable or as an upgrade to a turntable's built - in preamp. It has a selectable moving magnet/moving coil input with fixed gain and impedance, compatible with a wide variety of MM/MC cartridges. High - quality FET inputs combined with a negative feedback - type phono equalizer circuit ensure a low - noise signal. Precision components offer excellent RIAA response. Its all - metal construction enclosure provides great isolation from radio and electronic noise interference. The preamp is built with high quality for low noise and minimum distortion, featuring a machined aluminum front panel and gold - plated input/output RCA connectors. Technical specs include RCA input/RCA output with a grounding post, specific input impedance, sensitivity, rated output, gain, and signal - to - noise ratio for both MM and MC types. It runs on a DC 15 V, 1.2 A power supply, weighs 1.96 lbs (0.89 kg), and has dimensions of 1.85' x 7.78' x 4.94' (47 x 197.5 x 125.5mm). It comes with a power supply.
Using the Audio - Technica AT - PEQ30 phono preamp is easy. First, connect your turntable to the preamp using the RCA cables. Make sure to connect the grounding post to prevent any unwanted noise. Then, select the appropriate input type (moving magnet or moving coil) based on your turntable's cartridge. Plug in the power supply and turn it on. When using it, avoid placing it near sources of strong radio or electronic interference like large speakers or routers. This can affect the sound quality. For maintenance, keep it in a clean and dry place. You can use a soft, dry cloth to wipe the exterior. If there is dust inside, you can use a can of compressed air to gently blow it out. Don't open the enclosure yourself as it may void the warranty and cause damage. Regularly check the cables for any signs of wear and tear and replace them if necessary.
