The Audioengine A1 Wireless Speaker Pair in Grey is the most affordable compact speaker option from Audioengine without sacrificing sound quality. These compact active monitors don't require an amplifier. You can connect them via wireless Bluetooth or a 1/8' stereo input. They also have a subwoofer output with a dedicated volume knob. The dual class D amplifier delivers clear and punchy sound. Despite their small size, they offer great performance and come with all necessary cables. Priced at $199, the A1 provides a low - cost audio setup. It uses the same silk dome tweeters and aramid fiber woofers as the A2+ ($269), offering comparable sound with Bluetooth connectivity. When comparing the A1 and A2, they share the same woofer, tweeters, and aptX Bluetooth chip. However, the A1 has a digital amplifier, a vinyl - wrapped cabinet, and a 3.5mm stereo input, while the A2 has a class A/B amplifier, a hand - painted cabinet, RCA + USB inputs, and upgraded speaker posts. Key features include Bluetooth 5.0 audio with aptX, AAC, and SBC codec support, a 100 - ft. (30m) wireless range, 2.75' aramid fiber woofers, 3/4' silk dome tweeters, 60W peak power total, a frequency response of 65Hz - 22kHz ±2.0dB, 110 to 240 VAC, 50 / 60 Hz AC input power, dimensions of 6'(H) x 4'(W) x 5.25'(D) per speaker, and a weight of 6.7 lbs (pair). The A1 can be bundled with the S6 Powered Subwoofer, perfect for home studios, podcast monitoring, and gaming setups. The A1 comes with a 3.5 to 3.5mm cable, an RCA to 3.5mm adaptor, a speaker cable, and a power cable. The S6 comes with a removable grille, an AC power cord, 2m mini - jack and RCA audio cables, a microfiber bag, and a setup guide.
Using your Audioengine A1 Wireless Speaker Pair is easy. First, connect the speakers to each other using the provided speaker cable. Then, plug in the power cable to a suitable power source. You can connect your audio device via Bluetooth. Just turn on Bluetooth on your device and pair it with the speakers. If you prefer a wired connection, use the 3.5 to 3.5mm cable or the RCA to 3.5mm adaptor. When using the subwoofer output, adjust the dedicated volume knob to get the right bass level. For the best performance, place the speakers on a stable surface at ear - level. Avoid placing them near heat sources or in direct sunlight. When it comes to maintenance, keep the speakers clean by gently wiping them with a dry, soft cloth. If the speakers are not in use for a long time, unplug them from the power source. For the S6 Powered Subwoofer, make sure to handle the removable grille with care. The cables should be stored neatly to avoid damage. Follow the setup guide that comes with the S6 for proper installation.
