The Audio-Technica AT-XP3/H is a top - notch DJ cartridge headshell combo. It features a dual moving magnet (MM) cartridge made just for DJs. Pre - mounted on the Audio - Technica AT - HS6BK headshell, it offers high output and strong tracking force, perfect for active DJing. The durable polymer/glass fiber body with a conical bonded stylus ensures reliable performance and great sound. The carbon fiber - reinforced cantilever and nylon wire suspension provide precise tracking. The cartridge design gives maximum visibility of the stylus tip, making it easy to cue tracks. It's compatible with standard half - inch mount turntables. The AT - XP3 cartridge body can work with any XP or VM95 series stylus, offering choices for different budgets and applications. Technical specs include a 5.5mV output voltage, a 20 - 18,000 Hz frequency response, and more. The package comes with the pre - mounted cartridge, installation screws, washers, and nuts.
Using the Audio - Technica AT - XP3/H is easy. First, make sure your turntable is a standard half - inch mount type as this combo is compatible with such turntables. Install the pre - mounted cartridge on your turntable using the provided 11mm and 8mm installation screws, washers, and nuts. When you're ready to DJ, the high output and strong tracking force will let you play your tracks smoothly. Thanks to the great visibility of the stylus tip, you can easily cue up the next song. As for maintenance, keep the cartridge clean. You can use a soft brush to gently remove any dust from the stylus. Avoid touching the stylus with your fingers as it can damage the tip. If you need to replace the stylus, the ATN - XP3 is the recommended replacement. Also, store the cartridge in a safe place when not in use to prevent any accidental damage.
