The Audio-Technica AT-VM95E is a dual moving magnet (MM) phono cartridge with an elliptical stylus. It offers extremely low distortion and excellent channel separation, delivering outstanding tonal quality. The durable, low-resonance polymer housing with an aluminum cantilever ensures long - lasting performance. With threaded inserts in the cartridge body, you can easily mount it to the headshell using just two screws, no nuts needed. This cartridge is compatible with half - inch mount turntables, and the AT - VM95 cartridge body can be paired with any VM95 series stylus. It comes with (2)x 11 mm installation screws, (2)x 8 mm installation screws, (2)x washers, and a non - magnetic screwdriver. Technical specs include a 4.0mV output voltage, a frequency response of 20 - 22,000 Hz, and more.
Using the Audio - Technica AT - VM95E phono cartridge is a breeze. First, grab the non - magnetic screwdriver provided. Then, use the appropriate 11 mm or 8 mm installation screws and washers to mount the cartridge to the headshell of your half - inch mount turntable. You only need to use two screws as the threaded inserts in the cartridge body make nuts unnecessary. When using, make sure the tracking force is set between 1.8 - 2.2 g. For maintenance, keep the stylus clean. You can use a stylus brush to gently remove dust and debris. Also, store the cartridge in a dry and clean place when not in use. If you need to replace the stylus, since all VM95 Series share the same body, you can choose any of the six interchangeable AT - VMN95 replacement styli.
